12V Fridge Compressor Replacement for RV,Truck,Car Refrigerator and DI

12V Fridge Compressor Replacement for RV,Truck,Car Refrigerator and DIY Cooler Builds,12V DC Rotary Cooling Unit Compatible with Most Portable Fridges and Cooling Systems（12V）

$129.77 $349.99

12V Small Refrigeration Compressor Mini Rotary Compressor for Compact Mobile Cooling Systems,Portable Air Conditioners, Ice Making Machine, Personal Cooling Systems, Mini Refrigerators(12V)SPECIFICATION
Motor Type:BLDC Permanent Magnetic Motor
Pole/Phase No.:10 Pole 5 Phase
Magnetic Type:NdFeB
Insulation Class:E CATEGORY (Insulation Material PPS or PBT)
Winding Resistance (L-L):0.7(20℃) Ω
Operation Inverter:Driver, D.C. voltage 12V
Voltage:BLDC, DC 12V (Driver input)
Starting voltage:9V
Hydrostatic strength test (Low):Strength pressure 7.45MPa (76㎏/㎠)
Hydrostatic strength test (High):Strength pressure 16.2MPa (165㎏/㎠)
Residual moisture / Residual impurities:100mg Max / 100mg Max
Insulation Resistance:50 MΩ min. (with 500V D.C mega tester)
Withstand Voltage:1800V-1sec(1250V-1min) Leakage current is less than 2.5mA
ACCESSORY PARTS LIST
※Controller*1
※Rubber mat*3
※GROMMET SLEEVE*3
※Screw of Compressor*3
※Washer of Compressor*6
Please in strict accordance with the drawings requirements and fittings required to install the compressor.

INSTALLATION & APPLICATION
1.General
※Avoid installing the compressor in apparatus using refrigerants containing chlorine, such as R12, R22, R502, etc. Don't use filling devices that have been used for CFC or HCFC refrigerants before when filling the refrigerant.
※Don't use cleaning agents containing chlorine for cleaning circuits. Make sure that there is no residual chlorine left if they have to be used. Special attention: The content of chlorine related substances in refrigerating systems must be below 100 PPM of the total refrigerant gas filled.
※Use specified drying filters for HFC-134a only. Install the filters right after the sealing package is opened.
※Tubing used in systems must be clean and free from residual oil left from the manufacturing process.

See the COMPRESSOR DRAWING LIST for more information.